OWNER’S MANUAL
S-CAPE II ELECTRIC ADJUSTABLE BEDS 800-733-1818 iscape, s-caep, s-cpae, s-acpe, 2 sc-ape, -scape, s-cap, II s-cae, s-cpe, s-ape, -cape, s-cape wa1hugger, walhugger, walhuggre, wallhuggre, wallhugegr, wallhugger, wallhguger, walluhgger, walhlugger, wlalhugger, awllhugger,wa1-hugger, wal-hugger, wal-huggre, wall-huggre, wall-hugegr, II wall-hugger, wall-hguger, wall-uhgger, wallh-ugger, wal-lhugger, wlal-hugger, awll-hugger, two, adjustabe, adjustable, adjustale, 2 adjustible, adjusteble, adjustble, adjustabul, adjusable, adjustibul, adjutable, adjustebul, adustable, adjstable, ajustable, adjustibre,
S-cape
iscape, s-caep, s-cpae, s-acpe, 2 sc-ape, -scape, s-cap, II s-cae, s-cpe,
s-ape, -cape, s-cape wa1hugger, walhugger,
walhuggre, wallhuggre, wallhugegr, wallhugger, wallhguger, walluhgger,
walhlugger, wlalhugger, awllhugger,wa1-hugger, wal-hugger, wal-huggre,
wall-huggre, wall-hugegr, II wall-hugger, wall-hguger, wall-uhgger, wallh-ugger,
wal-lhugger, wlal-hugger, awll-hugger, two, adjustabe, adjustable, adjustale,
2 adjustible, adjusteble, adjustble, adjustabul, adjusable, adjustibul,
adjutable, adjustebul, adustable, adjstable, ajustable, adjustibre,
S-CAPE,ADJUSTABLE,Beds,Owners, manual
MODEL
NO:
·
warning
·
installation
·
operation
·
accessories-S-CAPE ADJUSTABLE BEDS OWNER’S
MANUAL
·
trouble
shooting
·
warranty
RETAIN FOR
FUTURE
REFERNCE
SERIAL NO: SER.
CA0098812
 |
||||
| iscape, s-caep, s-cpae, s-acpe, 2 sc-ape, -scape, s-cap, II s-cae, s-cpe, s-ape, -cape, s-cape wa1hugger, walhugger, walhuggre, wallhuggre, wallhugegr, wallhugger, wallhguger, walluhgger, walhlugger, wlalhugger, awllhugger,wa1-hugger, wal-hugger, wal-huggre, wall-huggre, wall-hugegr, II wall-hugger, wall-hguger, wall-uhgger, wallh-ugger, wal-lhugger, wlal-hugger, | ||||
|
||||
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE
USING THIS PRODUCT.
Your Electric Adjustable Bed is totally engineered
to provide you with reliable operation and the
strength you
deserve. The manufacturer has thoroughly tested and inspected this
product prior to
shipment to
you. The utmost in comfort and
safety is provided for you.
This Electric Adjustable Bed has a grounded plug
as a safety feature to reduce risk of electric shock.
The plug will only fit into a ground wall outlet
one way. If this plug does not
fit into your wall outlet,
then contact a qualified electrician and have
them install a properly grounded outlet.
NEVER
REMOVE THE GROUNDING PIN OR ALTER THE PLUG IN
ANY WAY.
The use of adapters
is not recommended unless the outlet is checked by a qualified electrician
to ensure proper grounding of
the adater.
Failure to use a properly grounded outlet for this prodict will compromise
this safety
feature and may result in electric shock, electric
fire, or faulty operation of this product.
DO NOT
OPEN the control box, motors,
or hand controls. The warranty
is void if these units are tampered
with. Any repair or replacement
of electrical components must be implemented by an
authorized person.
This bed is strictly designed for in-home
use only. It is NOT designed
for hospital use and is not
designed to meet hospital
standards. Do not use this bed
with oxygen TENT TYPE therapy
equipment, or use near explosive
gases.
After the bed is unboxed, immediately dispose
of packaging as it can smother small children and
pets.
To avoid injury, children or pets should not
be allowed to play under/on the bed.
Children should not operate this bed without adult supervision.
This Electric Adjustable Bed is equipped with
a special locking caster for your
safety. In order to
prevent movement of this product, all four casters
must be locked in
position. This can be
accomplished by simply pushing down on the safety
latch on the caster. To resume
mobility of the
product, simply lift up on the safety
latch. You are strongly encouraged
to lock the casters in place if the
bed is positioned on a hard surface such as wood
or linoleum. NOTE: To avoid
damage to
flooring, caster must be installed before operating
the bed. Failure to attach casters
may void
product warranty.
|
As with any product that produces a vibrating
motion, it is possible that some pacemakers may
interpret this motion as a false sense of movement
and/or exercise. This may or
may not affect your pacemaker. If
you have any concerns please consult your physician.
This bed is specifically designed to have no
maintenance by you, the user.
Therefore, you are
encouraged not to open any motors, alter the
wiring, or adjust, modify or change the structure of the product as it will
void the warranty.
This bed was tested and found to comply with
the limits for a Class B digital device. pursuant to Part
15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful
interference in a residential
installation. This bed
generates, uses, and can radiate
radio frequency
energy, and if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.
PRODUCT RATINGS
The lift motors in this bed are NOT designed
for continuous use. Reliable
operation and full life expectancy will be attained as long as the lift motors
do not operate any more than five (5) minutes
over a thirty (30) minute
period. Any attempt to circumvent
or exceed this rating will shorten the life expectancy of the product and
may void the warranty.
The bed will structurally support weight up to
350 pounds distributed uniformly
across the head and
foot
sections. The product is
NOT designed to support or lift this amount of weight only in the
head
or foot sections by
itself. Any attempt to circumvent
or exceed this rating will damage the product
AND
void
the warranty.
For best performance, consumers should enter
and exit the adjustable bed with the bed in the flat or
down position.
|
STEP
1
Before
discarding any packaging materials,
locate the following items:
·
1 – Mattress Retainer
Bracket
·
4 – Legs
·
4 – Casters
·
1 – Hand Control
·
2 – Headboard Brackets
Lift the base of the bed from the carton, keeping
the unit top-side-down.
STEP
2
Screw legs into base unit and hand
tighten. Insert casters into
the caster sockets at the bottom of
each leg.
Note: To avoid damage
to flooring, casters must be installed before operating the
bed.
Failure to attach casters may
void
warranty.
STEP
3
Warning: Power cord(s) must not interfere with any of the electric
bed mechanisms. Unwrap and
stretch out power cord and cord for receiver
box. Remove protective covering
from the base unit. Carefully
turn the entire base assembly over so that it is resting on its
casters.
If
this product is not going to be attached to a headboard, omit Step4 and Step
6.
STEP
4
Attach the headboard brackets per instruction on page
5. Brackets must be attached
to allow a
1 ½-inch space between the mattress and
headboard.
Note: When attaching
twins to a king size
headboard, it is only necessary to prepare the
outside brackets for use. Consult
your local dealer for swing
hinge kits, which are used to attach two twin
size beds to a king size headboard.
STEP
5
Loosen the four screws at the foot end of the bed and slide the
mattress retainer into position. Tighten
screws. The mattress retainer
must be used or the mattress will slide off the end of the bed when the head
is raised.
Unpack
the mattress and place it on the
base unit.
Dispose of all plastic packing material.
STEP 6
Attach the headboard to
the headboard brackets.
Warning:
To avoid potential injury, position the headboard with
a
distance of 3 inches or less between the headboard and the top of the
mattress.
STEP 7 Install two 9-volt batteries into receiver box. Place the box in an area that is easily accessible.
In case of power failure, the receiver box is equipped with a reset button
that when depressed and held, will return the bed to the “flat”
position.
Note: Batteries should
be replaced after each use of the power d own feature.
STEP 8 Plug the electric bed power cord into electrical outlet.
|
HEADBOARD BRACKET
ASSEMBLY INSTRUCTIONS
Place headboard bracket assembly onto frame of bed. Loosely attach headboard bracket assembly to the frame, using 2 long bolts and tensi-nuts provided. Slide assembly into position leaving 1 12” between edge of bed and face of headboard bracket. Tighten tensi-nuts. Repeat procedure to attach other headboard bracket. Measure the distance between headboard bracket slots and measure the distance between holes in headboard. Remove bolts to make width adjustments. After width adjustment is made, reinstall bolts and tighten securely.
|
S-CAPE 1
OPERATING INSTRUCTIONS
Transmission indicator light: Verifies a button is being pressed.
Foot Up Button: Press and hold this button to raise the foot section.
Foot Down Button: Press
and hold this button to lower the foot section.
Head Up Button: Press and hold this button to raise the head section to the desired position.
Head Down Button: Press and hold this button to lower the head section.
Foot Massager On/Increase Button: This button starts the foot massager and increases the speed as long as the button is pressed. When turned o the massager has an automatic timer of 30 minutes.
Foot Massager Decrease/Off Button: The speed of the foot massager decreases as long as this button is pressed and turns off the massager.
Head Massager On/Increase Button: This button starts the head massager and increases the speed as long as the button is pressed. When turned on the massager has an automatic timer of 30 minutes.
Head Massager Decrease/Off Button: The speed of the head massager decreases as long as this button is pressed and turns off the massager.
Wave Decrease/Off Switch: Press left side of switch to decrease the speed of the wave feature. Continue to press this side of switch to stop wave feature.
Wave On/Increase Switch: Pressing the right side of switch starts the wave feature and increases the speed as long as the button is pressed.
Reset Button: Massagers will turn off and the bed will move to the flat position.
Auto Learn Function: This function is only needed if the hand control has been replaced.
Press and hold the Foot Up and Reset buttons. The transmission light will flash slowly and then flash rapidly. Continue to hold for 2 seconds and then release the buttons. The code for the new hand control has been learned. Note: If using the Auto Learn Function when more than one wireless equipped bed is in transmission range (approx. 50’ radius), you must remove power from all beds not intended to learn the new had control address.
Other features:
· To conserve battery life, the transmitter turns off all functions if any button is pressed for more than 50 consecutive seconds.
· Transmission indicator light verifies a button is being pressed and data is being sent to the bed
· Uses 4 “AAA” batteries.
RADIO FREQUENCY IS 310 MHZ.
WARNING: The transmitter and the receiver of the wireless control system have been tested and comply with FCC and DOC/MCC rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
· A note to consumers with pacemakers: As with any product that produces a vibrating motion, it is possible that some pacemakers may interpret this motion as a false sense of movement and /or exercise. This may or may not affect your pacemaker. If you have any concerns please consult your physician.
DO NOT DESTROY. RETAIN THESE
INSTRUCTIONS FOR FUTURE USE.
|
S-CAPE2
OPERATING INSTRUCTIONS
- S-CAPE ADJUSTABLE BEDS OWNER’S
MANUAL
Transmission indicator light: Verifies a button is being pressed.
Position buttons: Automatically moves bed to the selected position from any other setting. To s top the bed while in motion, press and hold any button until the bed stops.
Massage set button: Once desired settings of the massagers and wave have been activated, press this button to save those settings for the Favorite massage button.
Head up/down rocker switch: Adjusts head section of the bed to the desired position.
Foot up-down rocker switch: Adjusts foot section of the bed to the desired position.
Flat button: Massagers will turn off and the bed will move to the flat position.
Favorite massage arrow buttons: Slowly increases or decreases speed of the massager as long as the appropriate button is pressed.
Head massage arrow buttons: Slowly increases or decreases speed of the massager as long s the appropriate button is pressed.
Foot massage arrow buttons: Slowly increases or decreases speed of the massager as long as the appropriate button is pressed.
Head massager on/off button: Turns massager on or off. When turned on, the massage has automatic shut off timer of 30 minutes.
Foot massager on/off button: Turns massager on or off. When turned on, the massage has an automatic shut off timer of 30 minutes.
Wave on/off button: Once one or both massagers are activated, this button turns the wave feature on or off.
Wave arrow buttons: These buttons increase or decrease the speed of the wave feature as long as the appropriate button is pressed.
Auto Learn Function: This function is only needed if the hand control has been replaced.
Press and hold the Pos1 and Head massage on/off buttons. The transmission light will flash slowly and then flash rapidly. Continue to hold for 2 seconds and then release the buttons. The code for the new hand control has been learned. Note: If using the Auto Learn Function when more than one wireless equipped bed is in transmission range (approx. 50’), you must move power from all beds not intended to learn the new hand control address.
Other features:
· To conserve battery life, the transmitter turns off all functions if any button is pressed for more than 50 consecutive seconds.
· Transmission indicator light verifies a button is pressed and data is being sent to the bed
· Once the favorite massage is saved into memory, a loss of power to the bed does not erase the favorite massage settings.
· Uses 4 “AAA” batteries.
RADIO FREQUENCY IS 310 MHZ.
WARNING: The transmitter and the receiver of the wireless control system have been tested and comply with FCC and DOC/MCC rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
· A note to consumers with pacemakers: As with any product that produces a vibrating motion, it is possible that some pacemakers may interpret this motion as a false sense of movement and /or exercise. This may or may not affect your pacemaker. If you have any concerns please consult your physician.
DO NOT DESTROY. RETAIN THESE
INSTRUCTIONS FOR FUTURE USE.
ELECRIC BED ACCESSORIES
Consult your local dealer for these popular items:
Swing Hinge
Kit
600174
Rubber Caster
Cups
4B1034
Instructions for Attaching Swing Hinges to Headboard
Sing hinges are used to attach two twin size beds to a king size headboard.
Step 1 Loosely bolt slotted hinge to leg of headboard.
Step 2 Roll electric bed to headboard. Insert hinge under slotted hinge, aligning top and bottom holes.
Attach to electric bed with enclosed screws, lock washers and hex nuts.
Step 3 Insert hinge pin.
Step 4 Repeat steps 1-3 for other electric bed. Move entire unit into position where it is to be used in
the room. Adjust headboard so that it rests firmly on the floor. Tighten bolts on slotted hinges
that are attached to the headboard.
|
ELECTRICAL
If the bed does not operate:
· Check the power cord to see that it is securely plugged into the electrical outlet.
· Check the outlet by plugging in a lamp or another electrical device.
· Replace batteries in remote hand control.
· Reset, by unplugging the bed for 15 seconds.
· If the bed still does not work, contact:
Leggett & Platt, Inc.
Warranty Dept.
P.O. Box 140
Linwood, NC 27299
or
Call toll-free:
1-800-888-3078
NOISE CONCERNS
Because of the free fall safety design, the wheels of the lift arm should come into contact with the platform
boards slightly, to place tension on the mechanism and reduce the potential problem of noise.
The level of noise emitted in most cases is directly proportional to the acoustics of the room where the bed is placed. Thus when a bed is on a hardwood floor and the massagers run, it will resonate and sound louder than anticipated. To minimize this noise, place a piece of carpet or a rubber caster cup under each caster.
(Rubber caster cups can be purchased from your local dealer.)
When the bed is operated, there will be a hum from the motor system. This is normal.
LUBRICATION
The motors are permanently lubricated. No additional lubrication will ever be required for the motors. If the bed should creak at any time, use silicone oil or WD40 on the pivot point to eliminate the creaking.
OPERATIONAL NOTE FOR MULTIPLE BED INSTALLATIONS
When more than one wireless equipped bed is in transmission range (approx. 50’ radius), use only one hand control at a time. Using the hand controls simultaneously will cause them to interfere with each other, resulting in no operation from the bed.
WARNING! A note to consumers with pacemakers:
As with any product that produces a vibrating motion, it is possible that some pacemakers may interpret this motion as a false sense of movement and/or exercise. This may or may not affect your pacemaker. If you have any concerns please consult your physician.
|
|
S-CAPE 20-YEAR LIMITED
WARRANTY
Leggett & Platt, Incorporated (“L&P) warrants this
S-cape bed (the “S-cape”) to the consumer that is the original
purchaser (the “Purchaser”), subject to the terms and conditions set forth
herein.
FULL ONE YEAR
WARRANTY
This S-cape is warranted against defects in workmanship or
materials for a period of one year from the date of purchase by the
Purchaser. Upon notice during
the first year after the date of purchase, L&P will repair or replace
at no cost to the Purchaser any defective S-cape part, and L&P will pay
all authorized labor and transportation costs associated with the repair
or replacement of any parts found to be defective.
LIMITED FIVE YEAR
WARRANTY
During the second through fifth years from the date of purchase by
Purchaser, upon receipt of notice, L&P will replace any S-cape
part found to be defective. This
limited five year warranty shall not apply unless the defective part is returned
to L&P within ten (10) days of Purchaser’s receipt of the replacement
part. Purchaser shall pay all
service and transportation costs related to the replacement of the defective
part.
LIMITED TWENTY YEAR
WARRANTY
Upon notice during the sixth through twentieth years from the date
of purchase by the Purchaser, L&P will replace, upon terms and conditions
set forth in this paragraph, any S-cape part found to be
defective. Purchaser shall pay
1/180 of the then current replacement cost of the defective part multiplied
by the number of months after (5) years from the d ter of purchse, and L&P
shall bear the remainder of th cost of the replacement
part. This twenty (20) year
warranty shall not apply unless the defective part is returned to L&P
within ten (10) days of the Purchaser’s receipt of the replacement
part. Purchaser shall pay all
service and transportation costs related to the replacement of the defective
part.
After the twentieth year, Purchaser shall bear the entire cost of
repair and replacement of all parts and materials, including labor and
transportation.
ADDITIONAL TERMS AND
CONDITIONS
This warranty does not include
damage caused by Purchaser or by any other abuse or mishandling of the S-cape,
whether occurring in transit or by other
means. Any repair or replacement
of S-cape parts by an unauthorized person, agent or representative
shall void this warranty. This
warranty does not include damage to mattresses, fabric, cables, electrical
cords or items supplied by dealers.
Contact your dealer for warrantyon these
items. This warranty does not include costs for unnecessary service
calls, including costs for in-home service calls solely for
the purpose of educating the
consumer about the S-cape of finding an unsatisfactory power
connection.
The decision to repair
or to replace defective parts under this warranty shall be made, or cause
to be made, by L&P at its option and in is sole
discretion.
L&P shall not be liable for any incidental or consequential
damages or for any other damage, claim, or loss not expressly covered by
the terms of this warranty.
Some states do not allow
the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have
other rights which may vary from state to
state. This warranty is valid
in all 50 states, Canada, and Puerto Rico.
All claims and correspondence under this warranty shall be made
to:
Leggett & Platt, Inc.
Warranty Dept.
P.O. Box 140
Linwood, North Carolina
27299
For All Service Questions, Call:
1-800-888-3078
OWNER’S MANUAL
- S-CAPE ADJUSTABLE BEDS OWNER’S
MANUAL
MODEL
NO:
The serial number will be found on the decal which
is attached to the main
frame rail under the headboard.
Always mention the serial number when
requesting repairs parts.
WHEN ORDERING PARTS OR REQUESTING
SERVICE
ASSISTANCE,
PLEASE HAVE THE
FOLLOWINGREADY:
·
THE SERIAL NUMBER
·
THE MODEL NUMBER
·
THE NAME OF ITEM – S-CAPE ADJUSTABLE
BED
·
THE PART DESCRIPTION
|
MANUAL
PART NO.
99300590
9-00
Used
12557 Harbor Blvd
907 N Hollywood Way
1035 E Camelback Rd,
Phoenix, AZ
(800)733-1818
Bariatric-Heavy-Duty
Service-Repair-Parts
Latex Foam
1(800)-733-1818
Used
Garden Grove, CA 92840
(800)824-3145
Get
directions
More
information »
Burbank, CA 91505
(800)233-7382
Get
directions
More
information »
WORLD'S LOWEST PRICES:
(800)733-1818
Since 1964 - Member BBB
Report - SERVING ALL AREAS
Family Owned Since
1964
Contact